COMMODITY ATTRIBUTE
| HOLE DIAMETER | φ33~φ102 MM | ENGINE POWER | 30 KW | IMPACT FREQUENCY | 34~67 HZ |
| DRILL PIPE LENGTH | 3050 MM | RUNNING SPEED | 2.5 KM/H | ROTATING SPEED | 200~400 R/MIN |
| HOLE DEPTH | 2.7 M | MAX. PROPULSION | 9000 N | SECTION (WXH) | 2X2~3.5X3.5 M |
| DRILLING SPEED | 0.8~2 M/MIN | IMPACT ENERGY | 100~200 J | TOTAL WEIGHT | ≈6500 KG |
| OVERALL SIZE (L*W*H) | 7850 * 920 * 1750 MM |
FC10-1BCD drilling jumbo is mainly used to drill blast holes for tunneling constructions in mining, metallurgy, water and electricity, railway, highway engineering, etc. This series uses all hydraulic drive, with high efficiency and speed which can be 0.8-2 m/min.
The advanced hydraulically controlled drilling system, which is safe and easy to operate, incorporates the auto-stop and anti-jamming function, auto-stop at end-point, auto- wash.
This jumbo has a small body, runs with the crawler, can climbing flexibly on 14°slope. It can runs by electric and diesel engine, to ensure running and working when power shortage. The flexible hydraulic rock drill can work on the section, roof, side and floor. The drilling rig can not only drill blast hole, according to the basis of the section, it also can drill bolt hole conveniently with our patent impeller.
| Item | Parameter | |
| Body | Overall size(L×W×H) | 7050×920×1750 mm |
| Hole diameter | Φ33～Φ102 mm | |
| Drill pipe length | 3050 mm | |
| Hole depth | 2.7 m | |
| Drilling speed | 0.8～2 m/min | |
| Section (W×H) | 2×2～3.5×3.5 m | |
| Climbing capability (smooth-riding surface) | 25% | |
| Total weight | ≈6500 kg | |
| Walking aids | Engine power | 32.2 KW |
| Running speed | 2.5 km/h | |
| Min. turning radius | 4.5 m | |
| Boom | Up and down | up 55°, down 16° |
| Swing boom | inner 31°, outer31° | |
| Compensation | 1500 mm | |
| Rotation | positive180°
negative180° |
|
| Thruster | Pitching | down105°, up15° |
| Swing angle | inner45°, outer45° | |
| Total length | 4150 mm | |
| Hole depth | 2700 mm | |
| Max. Propulsion | 9000 N | |
| Impact flow | 30～45 L/min | |
| Impact oil pressure | 14～16 Mpa | |
| Torque | 60～260 N·m | |
| Impact energy | 100～200 J | |
| Impact frequency | 34～67 Hz | |
| Rotating speed | 200～400 r/min | |
| Air system | Blowing hole air pressure | 0.7 MPa |
| Oil tank air pressure | 0.03 MPa | |
| Rock drill air pressure | 0.4 MPa | |
| Water system | Rock drill water pressure | (≥)1.2 MPa |
| Colder water pressure | (≤)0.6 MPa | |
ABOUT US
OUR FACTORY
Mexico deal
Italy deal
Portugal deal
America deal
Peru deal
Albania deal
AUTHORITATIVE ATTESTATION
Reviews
There are no reviews yet.