FC30-1BD Drilling jumbo is mainly used to drill hole for tunnel construction in mining, metallurgy, water and electricity, railways, road engineering, etc. This series uses all hydraulic drive, with high efficiency and speed that can be 0.8-2m / min. The advanced hydraulically controlled drilling system, which is safe and easy to operate, incorporates the function of automatic stop and anti-jam, automatic stop at the end point, automatic washing. This jumbo has a small body, runs with the caterpillar, can flexibly climb on a 14 ° slope. Working with electric motor can greatly improve the working environment, reduce noise, dust and power consumption. The flexible hydraulic rock drill can work on the section, roof, side and floor. The jumbo can not only drill a blast hole, according to the base of the section, it can also drill a bolt hole conveniently with our patented impeller.
| Article | Parameter | |
|---|---|---|
| Body | Overall size (L × W × H) | 10300×1400×2600 mm |
| Hole diameter | φ33～φ102 mm | |
| Drill pipe length | 3850 mm | |
| Hole depth | 3500 mm | |
| Drilling speed | 0.8～2 m/min | |
| Section (b × h) | 2.5×2.5～6×6.5 m | |
| Electric motor at such power | 55+2.2+7.5 kW | |
| Internal combustion engine power | None kW | |
| Total weight | 12 t | |
| Bottom | Min. Turning radius | spot turn m |
| Running speed | 2.5 km/h | |
| Climbing ability | 14° | |
| Joint | inner45°, outer45° | |
| Up and down | up55°, down16° | |
| Swing boom | inner35°, outer35° | |
| Rotation fisherman | positive180°, negative180° | |
| Pitching | down105°, up15° | |
| Oscillation angle | inner90°, outer90° | |
| Compensation | 1500 mm | |
| Extension | 1200 mm | |
| Propulsion distance | 1765 mm | |
| Max. Propulsion | 15000 N | |
| Hydraulic Rock Drill | Model number | HYD300 |
| Impacting oil pressure | 13～16 Mpa | |
| Impacting the flow | 95～120 L/min | |
| Torque | 975 N·m | |
| Impacting power | 15 Kw | |
| Impact frequency | 55～80 Hz | |
| Rotation speed | 200-300 r/min | |
| Hole diameter | φ32～φ102 mm | |
| Weight | 152 Kg | |
| Hydraulic system | Impact of circuit pressure | 16 Mpa |
| Drill pipe rotation circuit pressure | 15 Mpa | |
| Compensation circuit pressure | 10 Mpa | |
| Boom loop pressure | 17.5 Mpa | |
| Propulsion loop pressure | ≈10 Mpa | |
| Leg Extension Loop Pressure | 18.5 Mpa | |
| Operating circuit pressure | 21 Mpa | |
| Air Sistem | Drop tank air pressure | 0.03 Mpa |
| Blow hole air pressure | 0.7 Mpa | |
| Rock drill air pressure | 0.4 Mpa | |
| Water system Electric system |
Rock Drilling Water Pressure | 0.8-1.5 Mpa |
| Cooler water pressure | 0.6 Mpa | |
| Installed potency | 55+7.5+2.2 Kw | |
| Supply voltage | 380/660 V | |
| Rated current | 102/58.7 A | |
| Electric motor rotation speed | 1470 r/min | |
ABOUT US
OUR FACTORY
Mexico deal
Italy deal
Portugal deal
America deal
Peru deal
Albania deal
AUTHORITATIVE ATTESTATION
Reviews
There are no reviews yet.