ATTRIBUT DU PRODUIT
DIAMÈTRE DU TROUS | φ33~φ102 MM | PUISSANCE DU MOTEUR | 30 KW | FRÉQUENCE D'IMPACT | 34~67 HZ |
---|---|---|---|---|---|
LONGUEUR DE LA TIGE DE FORAGE | 3050 MM | VITESSE DE COURSE | 2,5 KM/H | VITESSE DE ROTATION | 1470 R/MIN |
PROFONDEUR DU TROU | 2.7 M | MAX. PROPULSION | 9000 N | SECTION (L*H) | 2.5*2.5~5.5*4.5 M |
VITESSE DE FORAGE | 0,8~2 M/MIN | IMPACT ENERGY | 100~200 J | POIDS TOTAL | ≈8500 KG |
TAILLE GLOBALE (L*L*H) | 8350 * 1290 * 2450 MM |
DF20-2BD hydraulic Drilling jumbo is mainly used to drill blast holes for tunneling constructions in mining, metallurgy, water and electricity, railway, highway engineering, etc. This series use all hydraulic drive, two booms work together, with high efficiency and speed which can be 0.8-2 m/min. The advanced hydraulically controlled drilling system, which is safe and easy to operate, incorporates the auto stop and anti-jamming function, auto-stop at end-point, auto-wash. This jumbo has a small body, runs with the crawler, can climbing flexibly on 14°slope. Working with electric motor can improve the working environment a lot, reduces noise, dust and energy consumption. The flexible hydraulic rock drill can work on the section, roof, side and floor. The jumbo can not only drill blast hole,according to the the basis of section, it also can drill bolt hole conveniently with our patent impeller.The jumbo runs with both wheels and crawler, even suit working in bad environment.
Objet | Paramètres | |
Corps | Taille totale (L×L×H) | 8350×1290×2450 mm |
Diamètre du trou | Φ33~Φ102 mm | |
Longueur du tube de forage | 3050 mm | |
Profondeur du trou | 2.7 m | |
Vitesse de perçage | 0.8~2 m/min | |
Section (L×H) | 2.5×2.5~5.5×4.5 m | |
Climbing capability ( smooth-riding surface) | 25% | |
Poids total | ≈8500 kg | |
Walking aids | Engine power | 30 KW |
Vitesse de course | 2.5 km/h | |
Min. turning radius | 4.5 m | |
Boom | De haut en bas | up55°, down16° |
Flèche pivotante | inner14°, outer47° | |
Compensation | 1500 mm | |
Rotation | positive180°, negative180° | |
Propulseur | Pitching | down105°, up15° |
Angle de pivotement | inner45°, outer45° | |
Longueur totale | 4150 mm | |
Profondeur du trou | 2700 mm | |
Max. Propulsion | 9000 N | |
Impacting oil pressure | 30~45 L/min | |
Impacting flow | 14~16 Mpa | |
Couple | 60~260 N·m | |
Impacting energy | 100~200 J | |
Impacting frequency | 34~67 Hz | |
Système hydraulique | Impacting loop pressure | 16Mpa |
Drill pipe rotation loop pressure | 15Mpa | |
Compensation loop pressure | 10Mpa | |
Boom loop pressure | 20Mpa | |
Propulsion loop pressure | 11Mpa | |
Leg extension loop pressure | 21Mpa | |
Running loop pressure | 20Mpa | |
Système d'air | Drop tank air pressure | 0,03 Mpa |
Pression de l'air dans le trou de soufflage | 0,7 Mpa | |
Pression d'air des marteaux-piqueurs | 0,4 Mpa | |
Système d'eau | Pression de l'eau de forage | (≥) 1.2Mpa |
Pression de l'eau plus froide | (≤) 0.6Mpa | |
Electric system | Installed power | 30 KW |
Supply voltage | 380 V | |
Electric motor rotation speed | 1470 r/min |
À PROPOS DE NOUS
NOTRE USINE
Accord avec le Mexique
Accord avec l'Italie
Accord avec le Portugal
Accord avec l'Amérique
Accord avec le Pérou
Accord avec l'Albanie
Commentaires
Il n'y a pas encore de commentaires.