WARENATTRIBUT
| LOCHDURCHMESSER | φ33~φ102 MM | MOTORENLEISTUNG | 32,2 KW | SCHLAGFREQUENZ | 34~67 HZ |
| LÄNGE DES BOHRGESTÄNGES | 3050 MM | LAUFGESCHWINDIGKEIT | 0.85 KM/H | DREHZAHL | 200~400 R/MIN |
| TIEFE DES LOCHES | 2.7 M | MAX. FÖRDERUNG | 9000 N | ABSCHNITT (B*H) | 2*2~3.5*3.5 M |
| BOHRGESCHWINDIGKEIT | 0,8~2 M/MIN | IMPACT ENERGY | 100~200 J | GESAMTGEWICHT | ≈6500 KG |
| GESAMTGRÖSSE (L*B*H) | 7500 * 920 * 2023 MM |
FC10-1BDG Drilling jumbo is mainly used to drill blast holes for tunneling constructions in mining, metallurgy, water and electricity, railway, highway engineering, etc. This series runs by track wheels, can work in miles with the track. It uses all hydraulic drive system, with high efficiency and speed which can be 0.8-2 m/min. The advanced hydraulically controlled drilling system, which is safe and easy to operate, incorporates the auto-stop and anti-jamming function, auto-stop at end-point, auto-wash. This jumbo has a small body, runs with the rail. Working with electric motor can improve the working environment a lot, reduce the noise, dust and energy consumption. The flexible hydraulic rock drill can work on the section, roof, side and floor. The jumbo can not only drill blast hole, according to the the basis of section, it also can drill bolt hole conveniently with our patent impeller.
| Artikel | Parameter | |
| Körper | Overall size (L×W×H) | 7500×920×2023 mm |
| Hole diameter | Φ33～φ102 mm | |
| Drill pipe length | 3050 mm | |
| Hole depth | 2.7 m | |
| Drilling speed | 0.8-2 m/min | |
| Section (W×H) | 2×2～3.5×3.5 m | |
| Total power | 32.2 KW | |
| Total weight | ～6000 Kg | |
| Unten | Min. turning radius (spot turn) | 6 m |
| Running speed | 0.85 Km/h | |
| Climbing capability (smooth-riding surface) |
25% | |
| Boom | Up and down | Up55° down16° |
| Swing boom | Inner31° outer31° | |
| Entschädigung | 1500 mm | |
| Drehung | positive180°negative180° | |
| Strahlruder | Pitchen | done105° up15° |
| Swing angle | inner45° outer45° | |
| Total length | 4150 mm | |
| Hole depth | 2700 mm | |
| Max. Propulsion | 9000 N | |
| Air system | Blowing hole air pressure | 0.7 Mpa |
| Oil tank air pressure | 0.03 Mpa | |
| Rock drill air pressure | 0.4 Mpa | |
| Water system | Rock drill water pressure | (≥) 1.2 Mpa |
| Colder water pressure | (≤) 0.6 Mpa | |
ÜBER UNS
UNSERE FABRIK
Mexiko-Abkommen
Italien-Abkommen
Portugal-Abkommen
Amerika-Abkommen
Peru-Abkommen
Albanien-Abkommen
VERBINDLICHE BESCHEINIGUNG
Bewertungen
Es sind noch keine Bewertungen vorhanden.